Unique Aqua Systems & Chemical Industruies » Spares & Equipements

Multiport Valves

uniqadminuser — Thu, 21 Aug 2014 19:16:06 +0000

Ex-stock availability of different sizes of Multiport Valves, manual as well as automatic.
Sizes from 20Nb to 65Nb.

Hydro Pneumatic Tanks

uniqadminuser — Thu, 21 Aug 2014 17:48:16 +0000

There are several functions that a Hydro Pneumatic Tanks can perform. In a booster pump application, it can provide water to the system during periods of a no flow shut down of the booster pump or it can provide water to replace leak loads. In a well water application, it can provide the desired volume of water required between the pump shut down pressure and the pump turn on pressure. In a sprinkler or irrigation pump application the tank may provide cushion to maintain necessary pressure so the jockey pump will not short cycle. These tanks are ideal choice for new and replacement residential installations and pressure boosting applications.

Distribution Systems

uniqadminuser — Thu, 21 Aug 2014 17:45:08 +0000

Product Range : Distribution Systems (Strainers) starting from 14” to 63” with connections from 2.5” threaded to 6” flange. Flow ranging from 1m3/hr to 40 m3/hr

Plastic Filter Housings

uniqadminuser — Thu, 14 Aug 2014 18:29:39 +0000

Micron: 1/2”, 3/4”, 1” and 1.5”
The Plastic Filter Housings are ideally used for wide range of applications including residential, commercial and industrial. These are available in 5”, 10” and 20” configuration with both slim for low flow and jumbo for large flow application. The Optional Relief valve on the inlet of the cap gives ease of air release and prevents vaccum damage and full utilization of the filter elements. The thick side walls give it high pressure ratings. The top seated silicon O rings in the slim and the body fitted double O rings in the jumbo makes it Leak Proof even at high pressure applications.

Configuration: Std Suitable for Single 2.5”x10, 20” and Jumbo suitable for Single 4.5”x10” and 20” cartridges.

Flow per 10”: Polypropylene / Ploy Carbonate / SAN.

Filter Bags

uniqadminuser — Thu, 14 Aug 2014 18:27:30 +0000

Micron : 1,5,10,25,50,75,100 um
The Filter Bags (BP series bags) are made of non woven needle felt with glazed finish PP. This finish is created by melting of the outermost surface fibers producing a bond which reduces the possibility of migration. The PP moulded top and the ends are ultrasonically wielded together. The RSB series of bags are made of three layers of media. The inner layer works as a pre filter which is made of coarse Nylon mesh, the center layer is non woven felt which does the actual filtration and the outer most layer ensures 0 BYPASS and 100% seal and very accurate filtration.

Configuration: BP : Dia 4” x 10” & 20 “ & RSB : Dia 7”x17” & 32”

Flow per 10”: 100 LPM for 10 BP Series and 200 LPM for 17” of RSB for raw water with operating pressure of 2.5 bar.

Bag Filter Assembly

uniqadminuser — Thu, 14 Aug 2014 18:25:16 +0000

Micron: 1.5” BSP F
The series Bag Filter Assembly are made of light weight corrosion resistant PP to give all strength required without being bulky. The fixed head mounting & compact design makes it easy to mount to any machine. All the PBA models are supplied with pressure gauge, wrench & drain valve.

Configuration: Std : Dia 4.5”x10” & 20” with 1.5” BSP female threaded connection

Flow per 10”: 100 LPM for raw water with operating pressure of 2.5 bar.

Washable Net Cartridges

uniqadminuser — Thu, 14 Aug 2014 18:24:12 +0000

Micron : 30, 80
The Washable Net Cartridges series (RL series) is all PP washable type cartridges used primarily for pre-filtration of variety of fluids. The coarse micron ratings of 30 and 80 micron make it ideal for good pre filtration. The PP construction makes it compatible for wide range of chemicals and liquids.

Configuration: Std : Dia 2.5”x 10” & Jumbo : 4.5” x 10 & 20”

Flow per 10”: Std 20 LPM and Jumbo 40 LPM for water with operating pressure of 2.5 bar.

SS Filter Cartridge

uniqadminuser — Thu, 14 Aug 2014 18:22:30 +0000

Micron: 5,10,15,25,40,50,80,100 um
The SS Filter Cartridge (AC & ACP Series filter cartridges) are made out of versatile SS wire mesh in various micron ratings. The SS construction makes the filter resistant to all chemicals & temperatures. The Surface filtration technology boosts the flow-rate to almost double of all the standard filter cartridge with ZERO replacement cost.

Configuration: Std : Dia 2.5”x10”, 20”, 30” & 40, Jumbo : 4”x10”, 20”, 30” & 40”

Flow per 10”: Std 30 LPM and Jumbo 50 LPM for raw water with operating pressure of 2.5 bar.

Activated Carbon Filter Cartridge

uniqadminuser — Thu, 14 Aug 2014 18:21:29 +0000

Micron : 5 um
The Activated Carbon Filter Cartridge (CT series cartridges) combine the long life of carbon block filtration on with higher dirt holding capacity. These cartridges yields 5 micron nominal filtration which prevents the cartridge from plugging before its absorption capacity is exhausted, maximizing the utilization of the carbon.

Configuration: Std : Dia 2.5”x10” & 20” and Jumbo 4.5”x10” & 20”

Flow per 10”: 16 LPM for Std 10” and 30 LPM for Jumbo 10”.

Nominal Pleated PP Filter Cartridge

uniqadminuser — Thu, 14 Aug 2014 18:20:07 +0000

Micron: 0.5, 1, 5, 10, 25, 50
The Nominal Pleated PP Filter Cartridge (NPL Series cartridges) are the economical alternative to the industrial version. The cellulose polyester media is pleated with 4 sq ft for 9.75” filter whose ends have been immersed in vinyl plastisol, creating a unitized end cap and gasket which eliminates by pass.

Configuration: Std : Dia 2.5”x 10”, 20”, 30” and 40” Jumbo – 4” x 10” & 20”

Flow per 10”: Std : 16 LPM and Jumbo 50 LPM for raw water with a operating pressure of 2.5 bar.

High Efficiency Pleated PP Filter Cartridge

uniqadminuser — Thu, 14 Aug 2014 18:17:39 +0000

Micron : 0.2, 0.45, 1, 5, 10, 25

The High Efficiency Pleated PP Filter Cartridge (PL PP series of cartridges) are the most latest form of truly graded density microfiber media in pleated form. The multi layer pleating has created the graded density with coarser on the outside and finer towards the inside thereby increasing the dirt holding with very high efficiency.

Media	Length	Type
PP Polyproplene	5 125 mm	DOE Double Open End
PES Poly Ether Sulfon We	9 245 mm	222 S SOE Code 3 Spear
PT PTFE	10 251 mm	222 F SOE Code 3 Flat
NY Nylon	20 508 mm	226 S SOE Code 7 Spear
	30 762 nn	226 F SOE Code 7 Flat
	40 1016 mm

Grooved Spun PP Depth Filter Cartridge

uniqadminuser — Thu, 14 Aug 2014 18:16:27 +0000

Micron : 0.5, 1,5,10
The Grooved Spun PP Depth Filter Cartridge (GSP series cartridges) are constructed with thermally bonded PP Microfibers which are rolled on a rigid PP Center core for better strength and durability. The special microfiber construction has minimal fiber release with very high efficiency and very superior filtration. The micro grooves provide additional filtration area.

Configuration: Std. Dia 2.5”x10”, 20” and 40” Jumbo-4”x10” & 20”

Flow per 10”: 16 LPM for raw water with a operating pressure of 2.5 bar.

Spun PP Depth Filter Cartridge

uniqadminuser — Thu, 14 Aug 2014 18:14:54 +0000

Micron : 0.5, 1,5,10,25,50
The Spun PP Depth Filter Cartridge (SP series cartridges) are made up of 100% pure PP fibers. The fibers have been carefully spun together to form a true graded density cartridge.

Configuration: Std. Dia 2.5”x10”, 20” and 40” Jumbo-4”x10” & 20”

Flow per 10”: Std 16 LPM and Jumbo 50 LPM for raw water with a operating pressure of 2.5 bar.

String Wound Depth Filter Cartridge

uniqadminuser — Thu, 14 Aug 2014 18:11:01 +0000

Micron : 0.5, 1,5,10,25,50
The String Wound Depth Filter Cartridge (PP series cartridges) offer wide chemical resistancy spectrum. String Wound Depth Filter Cartridges are manufactured by PP cord wound on a PP core in precise pattern, assuring a high efficiency rating as well as a high dirt holding capacity.

Configuration: Std. Dia 2.5”x10”, 20” and 40” Jumbo-4”x10” & 20”

Flow per 10”: Std 16 LPM and Jumbo 50 LPM for raw water with a operating pressure of 2.5 bar.

Water Testing Digital Equipment

uniqadminuser — Thu, 14 Aug 2014 17:39:56 +0000

Water Testing Digital Equipment is a complete electro-chemistry solution for all your applications with a wide range of portable hand held testers. These instruments are designed and developed by professionals using advanced technologies in compliance with the international standards.

Filtration Media

uniqadminuser — Wed, 06 Aug 2014 19:11:45 +0000

Filtration Media / Sand Media –

We provide different types of filtration sand Media for your filtration needs.

Activated Carbon
Granular activated carbons are mostly made from Coconut Shells on petroleum coke, bituminous coal or lignite. Granular activated carbon is used in continuous process in areas like water treatment (drinking & effluent water), removal of mercury from effluents or alkali cells, solvent recovery, gold recovery, removal of odor, gas masks, ascatalyst carrier, for decholorination of water, purification & separation of gases, kitchen hoods, dry cleaning etc.

We provide activated carbon of different sizes and different Iodine values.

Ion-exchange Resins -
Ion exchange is the reversible interchange of ions between a solid (ion exchange material) and a liquid in which there is no permanent change in the structure of solid. Ion exchange is used in water treatment and also provides a method of separation in many non-water processes. We have ex-stock availability of different types of water treatment Ion exchange Resins.

Microbe Detection Device

uniqadminuser — Sun, 13 Jul 2014 18:40:31 +0000

BACTASLYDE Microbe Detection Device is a presterilized slide, coated with specially developed media.
BACTASLYDE has been found to be reliable and developed media for the growth of a variety of bacteria and yeasts compares well with conventional microbiological & fungi. It also has an added advantage, it’s dual media, which enables you perform different tests. BACTASLYDE can be used virtually in any solid or liquid materials.

Code	Type	Industries
BS-101	YEAST & FUNGI + TBC	Food, Soft Drink & Ice-cream, Dairy, Breweries, Pharma, Hospitals, Paper & Pulp, Paint & Pigment, Metal Working Fluids.
BS-102	E.COLI + TBC	Food, Soft Drink and Ice-cream, Pharma, Dairy, Water & Waste Water Treatment.
BS-103	PSEUDOMONAS + TBC	Food, Soft Drink and Ice-cream, Pharma, Dairy, Paper & Pulp, Paint & Pigment, Cooling Tower Water, Metal Working Fluids.
BS-115	SULPHATE REDUCING BACTERIA (SRB/SGB)	Paper & Pulp, Cooling Tower Water, Metal Working Fluids.
BS-PP1	IRON BACTERIA	Cooling Waters, Open Ponds, Water Outfalls from Pipelines, Metal Working Fluids.
BS-PP2	SALMONELLA	Food, Eggs, Egg Powder, Spices, Fisheries, Hospitals.
BS-PP3	STAPHYLOCOCCUS	AUREUS Food, Milk Products, Fresh Fish, Meat, Sauces, Canned Foods, Hospitals.
BS-PP4	AUREUS	Food, Fisheries, Processed Fish viz. Cooked deep frozen Prawns & Shrimps.

FRP Vessels

uniqadminuser — Sun, 13 Jul 2014 18:39:53 +0000

FRP Pressure VesselsMicron : 1,5,10,25,50,75,100 um

The FRP Vessels are made up high performance composite material with filament winding. All pressure vessels are 100% corrosion resistant with Thermoplastic Liners of Polyester. These are NSF & PED Certified. These are widely used for Pressure Sand filters, Softners, Mixed Bed, De Mineralisation and Carbon beds.

Size	Volume	Opening
8×35	25	2.5”-TOP
8×44	34	2.5”-TOP
10 x 35	40	2.5”-TOP
10x 54	63	2.5”-TOP
12×48	89	2.5”-TOP
13 x 52	97	2.5”-TOP
13x 54	105	2.5”-TOP
14 x 65	150	4”-TOP
16 x 65	185	4”-TOP
18 x 65	236	4”- T & B
21 x 62	312	4”- T & B
24 x 72	450	4”- T & B
30 x 72	708	4”- T & B
36 x 72	999	4”- T & B
42 x 72	1308	6”FL T & B
48 x 72	1675	6”FL T & B
63 x 67	2590	6”FL T & B
63 x 86	3280	6”FL T & B

Water Testing Kits

uniqadminuser — Sun, 13 Jul 2014 18:38:53 +0000

Our complete systems available in one package, for reliable testing. These water testing kits are extremely simple and easy to use, based on standard and established analytical methods. These standards are based on methods approved by American Public Health Association (APHA), AWWA and different pharmacopoeias.

Parameter	Range	No. of Tests/Kit
Total Hardness	2–40,5-100 mg/l as CaCO₃	250
Total Hardness	2–40,5-500 mg/l as CaCO₃	250
Total Hardness	5–100, 25–500mg/l as CaCO₃	250
Total Hardness	5–100, 25–500mg/l as CaCO₃	250
Total Hardness	1-20, 5-100mg/l as CaCO₃	250
Total Hardness	2-40, 5-100mg/l as CaCO₃	500
Total Hardness	2-40, 25-500mg/l as CaCO₃	500
Total Hardness	5–100, 25–500 mg/l as CaCO₃	500
Total Hardness	1–20, 5–100 mg/l as CaCO₃	500
Calcium Hardness	5–100 mg/l as CaCO₃	300
Calcium Hardness	25–500 mg/l as CaCO₃	300
Chloride	10–200 & 50–1000 mg/l as Chloride	300
Chloride	2–40, 5–100 mg/l as Chloride	300
Alkalinity	10–200 & 100–2000 mg/l as CaCO₃	300
Alkalinity	5–100 & 25–500 mg/l as CaCO₃	300
Free Chlorine (DPD)	0.1–2.0 mg/l as Chlorine	200
Free Chlorine (DPD)	0.2–4.0 mg/l as Chlorine	200
Sulphite	5–100 mg/l as Na₂SO₃	300
Nitrite (High Level)	5–100 & 50–1000mg/l as NaNO₂	300
Nitrite (Low Level)	0.04–0.8mg/l as NO₂	400
Dissolved Oxygen	0.65–7.8 mg/l as Oxygen	300
Chromate (Hexavalent)	5–100 & 25–500 mg/l as Chromate	200
Sulphate	10–200 & 50–1000 mg/l as Sulphate	350
Fluoride	0.2–2.0 & 0.5–5.0 mg/l as Fluoride	500
Fluoride	1–20 mg/l as Fluoride	500
Tannin (For Boiler Water)	5–100 & 25–500 mg/l as Tannin	300
Chlorine (Iodometric)	10–200 mg/l as Chlorine	300
Chlorine (Iodometric)	1–20 mg/l as Chlorine	300
Acidity	10–200 & 100–2000 mg/l as CaCO₃	300
Phosphonate / Sequestrant	5–100 & 50–1000 mg/l as HEDP	300
Phosphonate / Sequestrant	2–40 & 5–100 mg/l as HEDP	300
Amine (For Boiler Water)	5–100 & 50–1000 mg/l as Cyclohexylamine	300
Amine (For Boiler Water)	1–20 mg/l as Cyclohexylamine	300
Carbon Dioxide	2-40 & 10-200 as CO₂	300
Chlorine Dioxide	0.2–4.0 mg/l as Chlorine Dioxide	100
Hydrogen Peroxide	5–100 & 50–1000 mg/l as H₂O₂	300
Orthophosphate (High Level)	0, 5,10, 20, 30, 40 mg/l as PO₄	100
Orthophosphate (Low Level)	0.1, 0.2, 0.5, 1.0, 2.5, 5.0, 7.5,10 mg/l as PO₄	500
Silica	5, 10, 20, 40, 60, 80 mg/l as SiO₂	100
Silica (Low level)	0.01, 0.025, 0.05, 0.075, 0.1, mg/l as SiO₂	75
Silica (Medium level)	0.05, 0.1, 0.2, 0.4, 0.8, 1.5, 3.0, 5.0 mg/l as SiO₂	100
Silica (High level)	75, 100, 125, 150,175, 200 mg/l as SiO₂	100
Iron (Low Level)	0.05, 0.1, 0.3, 0.4, 0.7, 1.0, 1.5, 2.0 mg/l as Fe	175
Iron (High Level)	0, 2, 4, 6, 8, 10 mg/l as Fe	175
Hydrazine	0.1, 0.2, 0.3, 0.4, 0.5, 0.75 mg/l as Hydrazine	200
Zinc	0, 0.25, 0.5, 1.0, 2.0, 4.0 mg/l as Zn	450
pH	4 -10	500
Ammonium	0.5, 1.0, 2.0, 4.0, 6.0, 8.0 mg/l as NH₄	250
Ammonium	0.05, 0.1, 0.25, 0.5, 0.75, 1.0 mg/l as NH₄	100
Nitrate	1.0, 2. 5 , 5, 7.5,10, 20, 30, 40,50 mg/l as NH₃	400
Copper	0, 0.5, 1.0, 1.5, 2.0, 2.5 mg/l as Copper	250
Turbidity	1, 5, 10, 20 NTU	-
Molybdate	5, 10, 20, 30, 40, 50 mg/l as MoO₄	325
Chlorine (O. T. Method)	0.05, 0.1, 0.2, 0.4, 0.7, 1.0 mg/l as Cl₂	450
Chlorine (O. T. Method)	0.5, 1.0, 2.0, 3.0, 4.0, 5.0 mg/l as Cl₂	450
Chlorine (O. T. Method)	0.2, 0.4, 0.7, 1.0, 2.0, 3.0 mg/l as Cl₂	450
Chlorine (O. T. Method)	0.1, 0.2, 0.5, 1.0, 1.5, 2.0 mg/l as Cl₂	450